Chainsaw - Petrol Chain saws Online at Discounted Prices on Krishitool.com

Chainsaw - Petrol Chain saws Online at Discounted Prices on Krishitool.com

A chainsaw is a portable, mechanical saw which cuts with a set of teeth attached to a rotating chain that runs along a guide bar. It is used in activities such as tree felling, limbing, bucking, pruning, cutting firebreaks in wildland fire suppression and harvesting of firewood. Chainsaw operations are basically divided into three tasks: limbing, bucking, and felling. Limbing is the removal of branches from a downed tree. Bucking is cutting the trunk of the downed tree to length. And felling is cutting an upright tree in a controlled manner so that it falls where expected, and hopefully that’s in a good place. Before operating your saw, read the owner's manual to understand all the controls and safety features. Always follow the safety recommendations.To make a cut, hold the front handle with your left hand — thumb wrapped underneath — and grab the rear handle with your right hand. Get in position — legs apart for stability — and pull back the chain brake to disengage it. Then squeeze the throttle. The saw cuts best when the engine is at full throttle.

General Maintenance:

1.Your saw must be properly maintained to operate safely. Your manual lists the maintenance items and when to do them.

2.Every time you use the saw, check the chain tension and adjust as necessary.

Regularly inspect the bar and clean it.

3.Check the air filter — clean and replace it when necessary.

4.Inspect the operation of throttle lockout, the chain brake, the chain catcher and the oiler.

Follow the manufacturer's directions for mixing fuel or use an appropriate premixed fuel.